In case your swimming pool is starting to look like a murky pond with its ecosystem, it already needs to be given a shock treatment of chlorine. The experts in pool maintenance in Venice, FL, explain that it’s a process for cleaning the water of bacteria, algae, and other impurities. You can maintain a pool in the best condition by following this guide on how to properly perform a chlorine shock treatment.

The Right Time for Shock Treatment

The frequency of shock treatment depends on several factors: (1) It should be done after a pool party. (2) When there is dirt and debris in the pool because of a storm. (3) If you observe that algae is causing the water to turn green. (4) When the pool water already seems cloudy and has an odd smell. Otherwise, shock treatment once a week will help keep the pool water in ideal condition.

Guide to Chlorine Shock Treatment

1. Test the Water – Use a test kit to determine the current chlorine levels in the pool before you begin. For chlorine shock treatment, a concentration of 1.0 to 3.0 parts per million (ppm) is ideal. It might not be at all needed to shock the pool if its chlorine content is already high.
   
   
2. Determine the Amount Needed – Calculate the amount of chlorine shock you require. Know the pool’s volume in gallons. Shock treatment needs one pound for every 10,000 gallons of water. With that, estimate the right amount of chlorine you need to sanitize the water.
   
   
3. Dissolve the Chlorine – Those who do pool care in Venice, FL, advise that, before using granular chlorine products, dissolve the shock in a bucket of water. Add the chemicals to the water and not the other way around before adding them to the pool. This ensures the chlorine is evenly distributed.
   
   
4. Apply the Shock – Slowly pour the dissolved shock treatment around the periphery of the pool, paying particular attention to the areas lacking proper circulation. Guard against damaging the pool equipment by adding chlorine to the skimmers or return jets.
   
   
5. Turn on the Pool Pump – Run the pool pump for at least eight hours after adding the shock to make sure the chlorine is distributed evenly. To prevent sunlight from deteriorating the chlorine, it is advisable to carry out the shock treatment at night.
   
   
6. Test the Water Again – After allowing the shock to circulate, recheck the chlorine level. Verify that it has already dropped to within the safe swimming range of 1.0 to 3.0 parts per million. You can be certain that the treatment has worked when the expectedly high starting point has already decreased.
   
   
7. Wait before Swimming – It’s crucial to hold off on letting swimmers return to the pool until the chlorine levels have dropped to a safe level. A waiting period of 24 hours is recommended. This guarantees the water is safe for swimming and it guards against skin and eye irritation.

Pool Cleaning by Pros

Ask those who do pool maintenance in Venice, FL, and they’ll say that chlorine shock is not a one-time fix. It’s an ongoing process of pool maintenance. Now that you know how it’s done, you can enjoy the wonders of your product’s crystal-clear water even more, knowing that you had a hand in it. If you need help from the pros, call us at TropiClearPools. Call us at 941-830-5006.